!-------------------------------------- LICENCE BEGIN ------------------------------------
!Environment Canada - Atmospheric Science and Technology License/Disclaimer,
! version 3; Last Modified: May 7, 2008.
!This is free but copyrighted software; you can use/redistribute/modify it under the terms
!of the Environment Canada - Atmospheric Science and Technology License/Disclaimer
!version 3 or (at your option) any later version that should be found at:
!http://collaboration.cmc.ec.gc.ca/science/rpn.comm/license.html
!
!This software is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY;
!without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
!See the above mentioned License/Disclaimer for more details.
!You should have received a copy of the License/Disclaimer along with this software;
!if not, you can write to: EC-RPN COMM Group, 2121 TransCanada, suite 500, Dorval (Quebec),
!CANADA, H9P 1J3; or send e-mail to service.rpn@ec.gc.ca
!-------------------------------------- LICENCE END --------------------------------------
***s/r digflt_ad - ADJ of digflt_tl
*
#include "model_macros_f.h"
*
subroutine digflt_ad 2,1
*
implicit none
*
*author
* M Tanguay - rpn - july 2003
*
*revision
* v3_11 - Tanguay M. - initial MPI version
* v3_21 - Lee V. - Remove TR2d
* v3_30 - Tanguay M. - Adapt TL/AD to itf
*
*object
*
*arguments
* none
*
*implicits
#include "glb_ld.cdk"
#include "mem.cdk"
#include "init.cdk"
#include "lctl.cdk"
#include "lun.cdk"
#include "rstr.cdk"
#include "schm.cdk"
#include "vta.cdk"
#include "vt1.cdk"
#include "vtx.cdk"
cvl#include "tr2d.cdk"
#include "tr3d.cdk"
#include "itf_phy_buses.cdk"
*
*modules
integer vmmlod,vmmget,vmmuld
external vmmlod,vmmget,vmmuld
integer open_db_file,close_db_file,rewind_db_file,
$ read_db_file,write_db_file
external open_db_file,close_db_file,rewind_db_file,
$ read_db_file,write_db_file
*
integer err, key(52), i, j, k, n, key1_, keya_, key1(Tr3d_ntr),
$ keya(Tr3d_ntr), pnlod
real tr1,tra
pointer (patr1, tr1 (LDIST_SHAPE,*)),(patra, tra (LDIST_SHAPE,*))
real busper(max(1,p_bper_siz)), dfcoef
*
real*8, parameter :: ZERO_8 = 0.0
* __________________________________________________________________
*
call gem_stop ('VERIFY digflt_ad',-1)
*
cvl if ( Tr2d_ntr.ne.0 ) call gem_stop ('digflt_ad',-1)
*
dfcoef = Init_dfco( abs( (Init_dfnp-1)/2 - Lctl_step ) )
*
***********************************************************************
* Physics fields at half span are saved to be used after initialisation
***********************************************************************
* --------------------------------------------------------------------------------
* NOTE: For ADJ of simplified physics, the requested TRAJECTORY is given in RWTRAJ
* --------------------------------------------------------------------------------
if (.FALSE.) then
if ( Lctl_step .eq. (Init_dfnp-1)/2 .and. Schm_phyms_L ) then
if ( .not. associated ( Phy_busper3D_digf ) )
$ allocate ( Phy_busper3D_digf (p_bper_siz*p_nj))
Phy_busper3D_digf = Phy_busper3D
endif
*
Rstri_half_L = .false.
if (Lctl_step.ge.(Init_dfnp-1)/2) Rstri_half_L = .true.
endif
*
****************************************************************
* ADJ of
* Passive tracers (no passive tracers in linear model)
****************************************************************
if ( Init_dftr_L ) then
*
key1_ = VMM_KEY (trt1)
keya_ = VMM_KEY (trta)
do n=1,Tr3d_ntr
key1(n) = key1_ + n
keya(n) = keya_ + n
end do
if (Tr3d_ntr.gt.0) then
err = vmmlod(key1, Tr3d_ntr)
err = vmmlod(keya, Tr3d_ntr)
do n=1,Tr3d_ntr
err = vmmget(key1 (n),patr1, tr1)
err = vmmget(keya (n),patra, tra)
do k=1,G_nk
do j=1,l_nj
do i=1,l_ni
tr1 (i,j,k) = dfcoef * tra (i,j,k) + tr1 (i,j,k)
end do
end do
end do
end do
err = vmmuld(key1, Tr3d_ntr)
err = vmmuld(keya, Tr3d_ntr)
endif
*
elseif ( Lctl_step .eq. (Init_dfnp-1)/2 ) then
*
key1_ = VMM_KEY (trt1)
keya_ = VMM_KEY (trta)
do n=1,Tr3d_ntr
key1 (n) = key1_ + n
keya (n) = keya_ + n
end do
if (Tr3d_ntr.gt.0) then
err = vmmlod(key1, Tr3d_ntr)
err = vmmlod(keya, Tr3d_ntr)
do n=1,Tr3d_ntr
err = vmmget(key1 (n),patr1, tr1)
err = vmmget(keya (n),patra, tra)
do k=1,G_nk
do j=1,l_nj
do i=1,l_ni
tr1(i,j,k) = tra(i,j,k) + tr1(i,j,k)
tra(i,j,k) = ZERO_8
end do
end do
end do
end do
err = vmmuld(key1, Tr3d_ntr)
err = vmmuld(keya, Tr3d_ntr)
endif
*
endif
*
***************************************************************
* ADJ of
* Non-hydrostatic model fields
***************************************************************
*
if ( .not. Schm_hydro_L )then
*
key(1) = VMM_KEY(wta )
key(2) = VMM_KEY(wt1 )
key(3) = VMM_KEY(qpta )
key(4) = VMM_KEY(qpt1 )
key(5) = VMM_KEY(multa)
key(6) = VMM_KEY(multx)
key(7) = VMM_KEY(muta )
key(8) = VMM_KEY(mut1 )
pnlod = 8
*
err = vmmlod(key,pnlod)
*
err = VMM_GET_VAR(wta )
err = VMM_GET_VAR(wt1 )
err = VMM_GET_VAR(qpta )
err = VMM_GET_VAR(qpt1 )
err = VMM_GET_VAR(multa)
err = VMM_GET_VAR(multx)
err = VMM_GET_VAR(muta )
err = VMM_GET_VAR(mut1 )
*
do k=1,l_nk
do j= 1, l_nj
do i= 1, l_ni
*
mut1(i,j,k) = dfcoef * muta(i,j,k) + mut1(i,j,k)
multx(i,j,k) = dfcoef * multa(i,j,k) + multx(i,j,k)
qpt1(i,j,k) = dfcoef * qpta(i,j,k) + qpt1(i,j,k)
wt1(i,j,k) = dfcoef * wta(i,j,k) + wt1(i,j,k)
*
end do
end do
end do
*
err = vmmuld(-1,0)
*
endif
*
***************************************************************
* ADJ of
* Hydrostatic model fields
***************************************************************
key(1) = VMM_KEY(uta )
key(2) = VMM_KEY(ut1 )
key(3) = VMM_KEY(vta )
key(4) = VMM_KEY(vt1 )
key(5) = VMM_KEY(tdta )
key(6) = VMM_KEY(tdt1 )
key(7) = VMM_KEY(fita )
key(8) = VMM_KEY(fit1 )
key(9) = VMM_KEY(fipta)
key(10) = VMM_KEY(fipt1)
key(11) = VMM_KEY(tta )
key(12) = VMM_KEY(tt1 )
key(13) = VMM_KEY(qta )
key(14) = VMM_KEY(qt1 )
key(15) = VMM_KEY(tpta )
key(16) = VMM_KEY(tpt1 )
key(17) = VMM_KEY(pipta)
key(18) = VMM_KEY(pipt1)
key(19) = VMM_KEY(tplta)
key(20) = VMM_KEY(tplt1)
key(21) = VMM_KEY(psdta)
key(22) = VMM_KEY(psdt1)
key(23) = VMM_KEY(sta )
key(24) = VMM_KEY(st1 )
key(25) = VMM_KEY(gpta )
key(26) = VMM_KEY(gptx )
pnlod = 26
*
err = vmmlod(key,pnlod)
err = VMM_GET_VAR(uta )
err = VMM_GET_VAR(ut1 )
err = VMM_GET_VAR(vta )
err = VMM_GET_VAR(vt1 )
err = VMM_GET_VAR(tdta )
err = VMM_GET_VAR(tdt1 )
err = VMM_GET_VAR(fita )
err = VMM_GET_VAR(fit1 )
err = VMM_GET_VAR(fipta)
err = VMM_GET_VAR(fipt1)
err = VMM_GET_VAR(tta )
err = VMM_GET_VAR(tt1 )
err = VMM_GET_VAR(qta )
err = VMM_GET_VAR(qt1 )
err = VMM_GET_VAR(tpta )
err = VMM_GET_VAR(tpt1 )
err = VMM_GET_VAR(pipta)
err = VMM_GET_VAR(pipt1)
err = VMM_GET_VAR(tplta)
err = VMM_GET_VAR(tplt1)
err = VMM_GET_VAR(psdta)
err = VMM_GET_VAR(psdt1)
err = VMM_GET_VAR(sta )
err = VMM_GET_VAR(st1 )
err = VMM_GET_VAR(gpta )
err = VMM_GET_VAR(gptx )
*
do j= 1, l_nj
do i= 1, l_ni
*
st1(i,j) = dfcoef * sta(i,j) + st1(i,j)
*
end do
end do
*
do k=1,l_nk
do j= 1, l_nj
do i= 1, l_ni
*
gptx(i,j,k) = dfcoef * gpta(i,j,k) + gptx(i,j,k)
psdt1(i,j,k) = dfcoef * psdta(i,j,k) + psdt1(i,j,k)
tplt1(i,j,k) = dfcoef * tplta(i,j,k) + tplt1(i,j,k)
pipt1(i,j,k) = dfcoef * pipta(i,j,k) + pipt1(i,j,k)
tpt1(i,j,k) = dfcoef * tpta(i,j,k) + tpt1(i,j,k)
qt1(i,j,k) = dfcoef * qta(i,j,k) + qt1(i,j,k)
tt1(i,j,k) = dfcoef * tta(i,j,k) + tt1(i,j,k)
fipt1(i,j,k) = dfcoef * fipta(i,j,k) + fipt1(i,j,k)
fit1(i,j,k) = dfcoef * fita(i,j,k) + fit1(i,j,k)
tdt1(i,j,k) = dfcoef * tdta(i,j,k) + tdt1(i,j,k)
vt1(i,j,k) = dfcoef * vta(i,j,k) + vt1(i,j,k)
ut1(i,j,k) = dfcoef * uta(i,j,k) + ut1(i,j,k)
*
end do
end do
end do
*
err = vmmuld(-1,0)
*
return
end